Electric Setup For the Gordon Whitehead
Bowers Fly Baby
Bowers Fly Baby, Designed by Gordon Whitehead and Built by Peter Kirby
Designed by |
Gordon Whitehead |
Built by |
Peter Kirby |
Model Name |
Bowers Fly Baby |
Wingspan |
56" / 1422mm |
Flying Weight |
2.75lbs / 1247g Approx. |
Motor Thrust/Speed with
APC 11x5.5 Prop on 3SLiPo |
3lbs / 1360g - 41MPH approximate values |
"The plan shows 51 1/2" wing span but as Gordon suggests, for scale , enlarge wing by two bays which gives 56" span.
The 3s 1300 Lipo gives a good 5min. flying time with a nice scale speed at just over half throttle.
There is plenty of room for bigger capacity batteries
if required."
Kind Regards , Peter Kirby
We would suggest either a 3S 1800mAh or a 3S 2200mAh LiPo
Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via
the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging
charge.
We cannot deliver batteries outside of mainland UK