|



DPR 40in DPR PC Raven
Offering all the advantages of a 3S-fuelled, grab-n-go, aerobatic trainer but with the appearance and appeal of a semi-scale Sunday hack, this is an aeroplane
with satisfaction written all over it
One of the most prolific and successful R/C model aeroplane designers of our age is responsible for this eye-catching semi-scale
military trainer To anyone who's been in the hobby for a year or two, Tony Nijhuis will need no introduction and in collaboration with DPR
models another beautifully designed and manufactured ARTF has been realised Fact: Everything that Tony designs flies well and this is certainly
no exception Docile yet delightfully aerobatic this is a model for all pilots over and above A-Certificate standard
Crafted using traditional materials, built with absolute precision and finished to perfection you'll struggle to fault the fit, finish and presentation
of this 3S 2200mAh fuelled gem With a cockpit that's large enough to embellish and an undercarriage that's easy to remove, the option of super-detailing,
cleaning up the airframe and launching by hand, for a true-scale look, is ever present Suitable across a variety of flying fields (whether tarmac or grass)
and capable of handling year-round weather conditions, this is a model whose grab-n-go potential will repay your investment over and over
Features
- 85% Pre-finished airframe
- Lightweight balsa & ply construction
- Exemplary build & covering standards
- Pre-hinged control surfaces
- Docile flying characteristics
- Capable of conventional aerobatics
- Damage-limiting banded wing
- Full four-channel control
- Comprehensive hardware pack
- Takes a standard 3S 2200mAh LiPo
- Pre-painted cowl & canopy frame
- Eye-catching semi-scale colour scheme
Needed to complete
- 1x 6-channel Tx / Rx combo
- 2x Hitec HS-85MG servos or equivalent
- 2x Hitec HS-65MG servos (aileron) or equivalent
- 1x PO-2834-910KV brushless motor
- 1x 3S 2200mAh 60C Li-Po
- 1x 40A ESC
- 1x 11x5.5" Electric propeller
- 1x 2.0 (51mm) inch spinner
Contents
- 1x Pre-built & covered fuselage
- 1x Pre-built & covered single piece wing
- 1x Pre-built & covered tailplane
- 1x Pre-built & covered fin
- 1x Factory painted ABS cowl
- 1x Pre-painted canopy
- 1x Hardware pack (horns, hinges, wheels etc.)
- 1x Trike undercarriage & wheel set
- 1x Wing dowel pack
- 1x Wing band pack
- 1x Step-by-step instruction manual
Specification |
Wingspan: |
1016mm (40") |
Flying
Weight: |
1080g (2.38lbs) |
Battery: |
3S 1800mAh - 2200mAh
60C LiPo (Sold Separately) |
Receiver: |
Min 6 Channel (Sold Separately) |
Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK
Please Note
Due to having our knuckles severely rapped by the Post Office we can no longer
send any kind of battery via the post Any order containing batteries
will have to be sent via courier and this will incur a minimum of a £999 delivery and packaging charge
We cannot deliver batteries outside of mainland UK
We can also supply
Our recommended electric has a lot more power than the recommended setup from DPR/Perkins
|