This is a kit of flat bits of balsa wood and ply which
you have to build and cover yourself.
The above 2 photos are an example of a completely finished model
BA Aurora Flying Wing
The Aurora has a 1.7 meters (67") wingspan, 3 channels and uses ELEVON configuration.
These kits have been very cleverly designed and precisely laser cut, so all you need is a flat building board.
These models dont use a traditional building method where you build the model over a plan. You do get a "pespective plane" See
link below.
- Wings are removable for easy transport and are held in place by large very powerful magnets
- All indications engraved on each piece must always be visible
- They must always be facing forward, in the case of horizontal and outward
in the case of vertical
- The fittings are accurate, but if there is a need for any adjustment, do it
- Do not glue before making sure
everything is correct. Dry assemble the parts before gluing them
- You will need some sandpaper of various grades, CA glue and / or wood glue,
in addition to epoxy glue.
- All assembly is illustrated on the A1 format sheet that is supplied with the kit. If the plan is not clear, then notes
will be in the assembly instructions
The kit contains all parts of laser cut wood, wire and tubes for linkage, in addition
to the perspective plan and instruction manual.
Specification |
Wing Span |
1700mm (67") |
Length |
750mm (29.5") |
Weight |
1000g /2.2 lbs |
Receiver |
Min 3 channel (Not supplied) |
Battery |
3S, 1,800mAh (Supplied Separately) |
Please Note: Due to size and weight limitations we are unable
to ship Kits, ARTFs and/or batteries outside of Mainland UK
Please Note Due to having our knuckles severely rapped by the Post Office
we can no longer send any kind of battery via the post. Any order containing batteries will
have to be sent via courier and this will incur a minimum of a £9.99 delivery and
packaging charge.
We cannot deliver batteries outside of mainland UK
We can also supply
|