You get all the items in the above photo
1x Motor + 1x ESC + 2x Prop + 3 Servo Value Power Package
We have managed to get a great on some motors, ESC's and Servos for the RC modeller on a budget
This Value Power Package Includes.....
- 1x Brushless Outrunner Motor A2212 1200kv fitted with 3.5mm male connectors
- 1x Rear Mounting kit ("X" mount and screws)
- 1x 3.2mm Prop Driver
- 1x 30A Brushless Electronic Speed Controller fitted with 3.5mm female connectors and "Deans Style" connector on the battery
end
- 1x of 9x5 Prop
- 3x of Tower Pro SG90 9g Size Servo
Motor Specifications |
Part Number |
A2212-1200kv |
RPM/Volt with no Load |
1200kv |
Diameter |
28mm |
Length |
27mm |
Weight |
53g inc wires and connectors |
Shaft Diameter |
3.175mm (3.2mm) |
Shaft Length |
11mm |
Bulkhead to Prop Length |
40.5mm
|
Max current (efficiency) |
4-10A (>75%) |
Voltage Input Range |
6V ~ 12.6 (2-3 LiPo Battery) |
Connectors |
3x 3.5mm Gold plated male bullet connectors |
Thrust/Speed |
635g/1.40lbs Using the supplied 9x5 prop at 11.1V (11.9A). Est Speed 42MPH |
|
615g/1.36lbs Using a GWS 8x6 prop at 11.1V (12.6A). Est Speed 49MPH |
Suitable Battery |
3S 800mAh / 3S 1000mAh / 3S 1300mAh |
ESC Specifications |
Length |
58mm (includes Heatshrink) |
Width |
26mm |
Depth |
8mm |
Weight |
28g (includes all cables and connectors) |
Connectors on Motor Side |
3x 3.5mm Gold plated female bullet connectors |
Connector on Battery Side |
Deans Style |
Max Current |
35A for 1 burst of 10 Seconds |
Continuous Current |
30A (with good cooling) |
Voltage Input Range |
6V ~ 12.6 (2-3 LiPo Battery) |
BEC Output |
5V/3A |
Wire |
190m JR Colours and universal plug |
Servo Specifications |
Part Number |
Tower Pro SG90 (comes with accessory pack) |
Length |
22.5mm (excluding mounting lugs) |
Height |
27mm (all of blue case) |
Width |
12.5mm |
Weight |
10.8g (including cable and connector, excluding arm) |
Wire |
250m JR Colours and universal plug |
Torque @4.8V |
1.2Kg ~ 1.4 Kg / cm |
Speed @ 4.8V |
0.12 seconds /60 degrees |
Working Voltage |
4.8V DC (do not use on 6V DC) |
Gears |
Nylon |
All sizes, weights and specifications are approximate.
We can also supply
|