Hobbywing 10A
UBEC/Voltage
Regulator
2-6 LiPo Input, 6.0 / 7.4 / 8.4V O/P
The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. The all-metal housing is designed to help
dissipate heat and reduce electromagnetic interference. UBEC output voltage is adjustable in three stages (6.0/7.4/8.4 V) with a continuous current of 10A
and a maximum of 15A.
The voltage specifications allow the use for a wide range of servos and electrical equipment. At the same time, the UBEC
is equipped with overcurrent protection, output short-circuit protection, overheat protection, and IP67 waterproof dust design, and can be
widely used on crawlers, trucks, and other electric models as well.
| Constant Current |
10A (About 4-6 Digital Servos) |
| Peak Current |
15A |
| Input Voltage |
2-6 LiPo |
| Output Voltage |
6.0V / 7.4V / 8.4V DC (selectable by Jumper) |
| Weight |
34g (includes all wires) |
| Dimensions |
45mm x 20mm x 16mm |
|
128
Bit Secure Shopping