brushless motors LiPo batteries electronic speed controllers inrunner Motors outrunner motors HiTEC Futaba Transmitters and Receivers servos

The Fixed Wing
Electric Flight Specialists

<<<  Back
Tel: 01256 782 512
Email us 
Click here to Check us out on Facebook and to get access to special offers and notifications of new releases

Setup for 72" Short Sunderland by Tony Nijhuis

Click here to visit Tony Nijhuis Designs

How to wire up multiple brushless motors

I (George of 4-max) am the proud owner of"The" Tony Nijhuis Sunderland, the actual one built by the man himself and the one that was featured in the RCM&E magazine. I put different motors in it that were more powerful and suitable of turning scale diameter 3 Blade Props. It now has enough power to slide along on it's belly on grass and take off without the need of a dolly or bungee. I also reduced the 4 packs of 3S 2200mAh to one pack of 3S 5000mAh, I get 8 minutes of slow scale like flying but if you like longer flights then a 3S 6000mAh might be better for you. PS it flys beautifully, and looks much larger then it's 6ft wingspan when it's in the air.


Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.75 delivery and packaging charge.
We can not deliver batteries outside of mainland UK


Item Part Number Description Price Quantity
Motor 4 x
4x Brushless Outrunner Motor with rear mounting set and prop driver £115.96
ESC 4 x
4x 30Amp Brushless ESC's
ESC Setup Instructions
and a Programming Card
UBEC 1 x
5 Amp UBEC £11.28
Props 2 x 8x6 - 3 Blade

2 x 8x6 - 3 Blade

2x Standard 3 blade props and
2x 3 blade pusher props

LiPo Battery 1 x
3S, 6000mAh LiPo Battery, 40C Cont, 60C Burst £67.49
<<<  Back Top