4-Max
The Fixed Wing
Electric Flight Specialists

A new formulation of 4 Min Speed Epoxy. Featuring high strength, a rapid 4 min setting time and formulated to set hard, clear & sandable. The new formula uses epoxy and hardener systems carefully matched to give high strength across gaps at 1:1 ratio, and yet tolerate slight mixing errors found in normal use.

A new formulation of 4 Min Speed Epoxy. Featuring high strength, a rapid 4 min setting time and formulated to set hard, clear & sandable. The new formula uses epoxy and hardener systems carefully matched to give high strength across gaps at 1:1 ratio, and yet tolerate slight mixing errors found in normal use.

The world's finest 5 minute epoxy. Sets crystal clear. Cures in less than 5 minutes.
Fuel-proof, vibration-resistant formula.

The world's finest 5 minute epoxy. Sets crystal clear. Cures in less than 5 minutes.
Fuel-proof, vibration-resistant formula.

The world's finest 15 minute epoxy. Sets crystal clear. Cures in less than 5 minutes.
Fuel-proof, vibration-resistant formula.

A new formulation of 20 Min Speed Epoxy. Featuring high strength, a rapid 4 min setting time and formulated to set hard, clear & sandable. The new formula uses epoxy and hardener systems carefully matched to give high strength across gaps at 1:1 ratio, and yet tolerate slight mixing errors found in normal use.

The world's finest 30 minute epoxy.
Sets crystal clear. Working time, 15 minutes. Cures in 30 minutes.
Fuel-proof, vibration-resistant formula.

All you need to join a pair of foam or wood wings in one simple kit. Fast cure, high strength, thin epoxy glue and a length of 4" wide fibreglass wing bandage. Just mix the contents of the two pots together and apply.

Add Micro Balloons to glue or resin for a lightweight filler.

A free flowing, very slow curing, hard epoxy especially developed for applying glass cloth to wooden structures. Good wetting properties and sands back well with 'wet and dry' for a top class surface finish.

Laminating & Finishing Resin for balsa & foam models. Easy sanding, low odour, foam safe. Water clean-up.

Ever Build One Strike super light weight Filler - Dry in 15 minutes. Will not shrink or crack. It's the same stuff as the more expensive branded light weight fillers

For fast strong repairs to small cavaties. Stronger then just Cyano. Can be drilled and tapped

Milled fibres are simply stirred into epoxy and polyester resins to thicken and improve their toughness, flexural strength, crack resistance and dimensional stability. They can also be used with thin cyanoacrylate by simply adding a couple of drops of thin penetrating ca (e.g. Roket Hot) to the Milled Fibre which will produce an extremely adhesive, hard & tough material.

A brand new non-toxic, easy flowing, weighting system.
Specially designed to pour into small cavities and set in place with your favourite thin cyano, or Epoxy. Use to adjust balance point of model planes 50ml bottle weighs 0.25 Kilo!