4-Max
The Fixed Wing
Electric Flight Specialists

Est. 2007

DPR Milan 2000 Thermal Glider
DPRTN0007
(RRP £109.99) Only £89.99

An example of a finished and covered kit.

An example of a finished and covered kit.

This is a kit of flat bits of ply and balsa that you have to build and cover yourself.

DPR Milan 2000 Electric Powered Thermal Glider

Designed by the prolific and world renowned Tony Nijhuis.
With roots planted firmly in the traditional balsa-built three-channel motor glider camp, the lightly loaded Milan 2000 merges old skool charm with contemporary design and modern construction methods to offer thermal-hunting club pilots the very best of both worlds.
In short, it builds quickly and easily using familiar tools, glues and covering materials and flies beautifully, as you might expect from a sleek airframe with a 2m polyhedral wing and high-lift undercambered trailing edge.

Uncomplicated soaring, thermal hunting and gentle aerobatics are what the Milan 2000 does best and that makes it a perfect machine for both beginners and old hands. One of the very few gliders that mechanically adapts to your flying style and the wind conditions, the Milan boasts adjustable tailplane incidence to cater for multiple balance points and flying conditions.
It goes without saying, of course, that its also dead easy to hand launch and perfect for solo operation.

Key Features

• Designed by Tony Nijhuis
• A satisfying traditional builders' kit
• High-quality wood, CNC cutting, parts & plan
• Lightweight balsa & ply construction
• Docile flying characteristics
• Damage-limiting banded wing
• High lift thermal wing section
• Flight mode adjustable tailplane
• Perfect for both raw beginners & experts
• Comprehensive hardware pack
• Full-size plan included

What's In The Box

• 1x Quality Laser-cut balsa & ply parts set
• 1x Strip wood bundle for spars and longerons
• 1x Hardware pack (horns, hinges etc.)
• 1x Pre-cut decal sheet
• 1x Wing band pack
• 1x Sandpaper sheet
• 1x Full-size plan
• 1x Comprehensive step-by-step build manual

Needed to Complete

• 1x 4-channel Tx / Rx combo
• 1x 4-Max PO-2834-910 Brushless motor
• 1x 4-Max 4M-HESC30AV2 - 30A Brushless ESC
• 1x 4-Max 3S 1300mAh - 2600mAh Li-Po Battery
• 2x 4-Max 4M-175AMG-030 Metal geared mini servos
• 1x 4-Max PP-FSPIN43-40 - Folding spinner assembly
• 1x 4-Max PP-FPROP10x6 folding propeller
• 1x 4-Max Roll(s) of heat-shrink film

Please click here to download the manual for the
DPR Milan 2M thermal glider DPRTN0007 Part 1

Part 2

Please Note: Due to size and weight limitations we are unable to ship Kits, Kits and/or batteries outside of Mainland UK

Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK

We can also supply

Glues and Coverings, Covering Iron, Soldering Tools, General Tools and Scalpels, Chargers, Charging Accessories

The following setup should provide around 1000g of thrust which will give this glider extreemly good performance (climb out).