brushless motors LiPo batteries electronic speed controllers inrunner Motors outrunner motors HiTEC Futaba Transmitters and Receivers servos

The Fixed Wing
Electric Flight Specialists

<<<  Back
Tel: 01256 782 512
Click here to Check us out on Facebook and to get access to special offers and notifications of new releases

ToolkitRC M7AC Multifunction, Dual Input
(100W-AC)/(300W-DC) Charger,
LiPo Tester, Servo Tester, Wattmeter, Balancer
LiPo, Li-lo, Li-Fe (A123M1),
Ni-Cd, Ni-MH, Pb (Lead Acid)

ToolkitRC M7AC Charger

ToolkitRC M7AC Charger

ToolkitRC M7AC Charger

Share on your Facebook Page


The ToolkitRC M7AC is a Multifunctional Dual Input Charger

The M7ACs core function is being a single channel battery charger. It is compatible with the main battery chemistries and supports direct connection with both XT60 and XT30 batteries.

It offers various charging modes, including storage charge. It also has a mode for testing the international resistance measurements of batteries.

The charger can be powered from AC or DC, so you can use it at home on mains power or at the field from a DC supply (input via XT60 connector).

The charging power output on AC is up to 100W, on DC with a suitable power supply up to 300W.

Additional functionality includes a battery cell checker, servo/ESC tester, PWM/PPM/S.Bus input testers (for receiver testing) and a variable voltage DC power supply output. There is USB-A port for charging your USB devices. The USB port can also be used to update the firmware.

The M7AC has intuative menus and is easy to navigate thanks to a simple scroll wheel. Like the ToolkitRC M9 charger, this charger also features  a voice alert function that is user customisable with audio files saved on the SD card. 

The ToolkitRC M7AC charger is a must have for anyone who wants an all-in-one tool that not only charges batteries, but can diagnose equipment, output SBUS, power other devices and more.

  • Receiver and servo test functions
  • Lipo, LiHV, LiFe, Lion, 1-6S,
    NiMh 1-16 cells
    PB 1.2-12V
  • Balance Lithium cells
  • Charging power: (100W-AC)/(300W-DC)
  • Discharge Current:
    Recovery MAX 15A (300W)
    N normal mode MAX 3A (15W)
  • Can measure battery voltage, battery internal resistance
  • lithium battery balance management
  • Measurement of signal values such as PWM/PPM/SBUS - 1µs accuracy
  • Can output PWM/PPM/SBUS standard signal, accuracy up to 1µs
  • Constant current, constant voltage source output, can customise1-28v constant voltage, 5-15A constant current
  • USB A 2.1A @ 5.0V output, to charge mobile devices
  • SD Memory card 128MB - 16GB


  • Input: 7.0-28.0V DC
  • Battery Types: Lipo  LiHV  LiFe @1-6S. NiMh @1-16S, Pb @1-10S
  • Dimensions: 144 x 125 x 43 mm
  • Weight: 245g
  • LCD: 2.4 inch RGB, 320 x 240 Pixel


  • PWM 880-2200µs @20-400Hz
  • PPM 880-2200µs*8CH @20-50Hz
  • SBUS 880-2200µs*16CH @20-100Hz
  • 1.0-5.0V @1-6S
  • Internal Resistance 0.1 mΩ-99mΩ @ 1-6S


  • PWM 500-2500µs @20-1000Hz
  • PPM 880-2200µs*8CH @20-50Hz
  • SBUS 880-2200µs*16CH @20-100Hz
  • 1.0-28.0V @ 0.5-15A mode: CC CV


1 x TookitRC Charger
1 x USB Cable
1 x Mains power cord with UK plug
1 x Manual

Please click here to download the ToolkitRC M7AC manual

Part Number Description Price Quantity
ToolkitRC M7AC Charger ToolkitRC M7AC Multi Function Charger £84.99
XT60 Multi Way Charge Cable
Click on photo for
larger image
XT60 Multi Way Charge Cable
XT60 Multi-connector charge cable
(XT60, Deans, JR and JST-BEC)
XT60H Connectors
Click on photo for
larger image
XT60 Connectors
XT-60 type connectors
(5 off male & 5 off female)
(Comes with terminal covers)
4mm bullet to XT60 Input Power Cable
Click on photo for
larger image
4mm bullet to XT60 Input Power Cable
4mm bullet to XT60 Input Power Cable £2.99
4mm bullet to XT60 Input Power Cable
Click on photo for
larger image
4mm bullet to XT60 Input Power Cable
Crocodile Clips to XT60 Input Power Cable
14AWG, 1000mm
<<<  Back Top