-
Easy setting, easy operation using programming
card.
-
Safe start-up system. The motor will not start no
matter which position the throttle stick is when the battery
is connected.
-
Automatic power cut-off. If the motor suddenly
stops rotating or the radio signal is lost for more than 3 seconds,
the power will automatically be cut off.
-
BEC provides power to receiver and servos (for
ESC with BEC).
-
High rate switching Pulse Wid th Modulation
(PWM): 16KHZ.
-
Over-heat protection. User set
via the program card. 90°C - 140°C (7 choices)
-
Over-voltage protection.
-
Low-voltage cut-off. 2.9V - 3.5V User set
via the program card (7 choices)
-
Timing mode; 0-30°(7 choices)
-
Break Strength is programmable via the program card (7 Choices)
-
Start up power is programmable via the program card (7 Choices)
-
Programming is very easy with the programming
card.
IF YOU WISH TO POWER YOUR RECEIVER AND SERVOS USING A 2S LiPo OR A 2S Li-ion BATTERY PLEASE CONTACT US FOR ADVISE ON HOW TO DO THIS.