Vislero
A6 Fully Featured
Intelligent multifunctional
charger/discharger/cycler
LiPo, Li-ion, Ni-Cd,
Ni-MH, Pb (Lead Acid),
Emoli
The
Vislero A6 is a simple
yet powerful multifunctional
charger. It is packed
with features that
exceeds many higher
cost units.
Primarily designed
for Lithium Polymer
(LiPo, Li-Poly) batteries,
it can also charge
Ni-Cd, Ni-MH, Emoli
and Pb (lead acid)
batteries.
When using the included
software on a PC,
you can monitor and
analyse the charging/discharging
process.
You don't need a PC
to use the Vislero
A6 charger as you
still have access
to all the functions
of the A6 via the
push buttons and LCD
display on the front.
The A6 features a
PC Analyser that provides
on screen monitoring
of the charging and
discharging process
and also allows the
chargers firmware
to be automatically
updated.
For non PC purchasers
the A6 will still
provide its full functions
but without the software
updates and PC viewing
options
The A6 is a 100W
charger – this
means that you can
charge the following
| 1S LiPo |
Any current
up to 5A |
| 2S LiPo |
Any current
up to 5A |
| 3S LiPo |
Any current
up to 5A |
| 4S LiPo |
Any current
up to 5A |
| 5S LiPo |
Any current
up to 4.76A |
| 6S LiPo |
Any current
up to 3.96A |
The Vislero A6
features:
- LiPo balancer
included for 4-Max/New
FlightPower/Thunder
Power type balance
connector and JST-XH
balance connector
(Hyperion/HiModel/Tornado/Kokam
and many others)
- The balance connector
board allows up
to 3x identical
2S LiPo to be charged
simultaneously or
2x identical 3S
LiPo simultaneously.
- LiPo balance charge
modes: Normal/Fast/Slow/Storage
- Monitor individual
cell voltages within
a LiPo battery pack
- Balance mode:
Pre charge balance
ability
- Back lit LCD display
screen
- Built in cooling
fan
- RS232 serial port
(used to upgrade
charger firmware)
- RS232-USB Adaptor
included
- Input cable with
4mm gold bananas
connectors and large
alligator clips
- Output cable with
4mm gold bananas
connectors and small
alligator clips
- Temperature sensor
included
- Vislero A6 Software
to monitor and record
charge/discharge
information
(on mini CD-ROM.)
Specification:
- Input Voltage:
11-20 Volts DC
- Idling Current:
Approx. 100mA
- Charge/Discharge
Power: Max. 100/15W
- Ni-Cd/MH: 1-18
Cells
- LiPo/Li-ion/Emoli:
1-6 Series
- Pb (lead acid):
2-24 Volts
- Charge Current:
0.1 to 5.0A
- Discharge Current:
0.1 to 3.0A
- No. of Cycles:
1 to 5 times
- Weight: 500g
- Dimensions: 160
x 98 x 42mm
|
128
Bit Secure Shopping