|
|
PP-DESC40AU
40A ESC
(Brushless Electronic Speed Controller)
|
| 
Photo for refrence
only
Please Click for a larger image |
Programming Card
Please Click for a larger image |
|
Specifications
| Constant
Current |
40A |
| Burst Current |
50A for 10 Seconds |
| Motor Input
Voltage Range
|
2-4 LiPo (5.6
- 16.8V DC) |
| BEC Voltage
Range |
2-3 LiPo (5.6
- 12.6V DC) |
| BEC Output |
5V DC @ 3A (3-4
standard servos)
|
| Weight (g) |
36g |
| Size (mm) |
52mm x 25mm
x 8mm |
| Connectors |
3x 3.5mm Male
fitted, 3x 3.5mm
Female +Heatshrink |
Features
-
Easy setting / Easy operation.
-
Safe start-up – The motor will not start
regardless of the throttle position.
-
Automatic power cut-off – When the motor
is stopped or when the radio signal has been lost for more the
3 seconds.
-
High rate of switching (PWM Pulse Width Modulation)
8 kHz
-
Over voltage protected. The ESC will not start
if the voltage is greater then 18V (except for the OPTO versions)
-
Low voltage cut-off 3.0V/2.7V (selectable) for
Lithium-ion/Lithium Polymer or 0.9V/0.7V (selectable) for Ni-Cd/Ni-Mh
batteries.
-
Selectable timing modes
• Low Timing – Providing high efficiency for 2,4
and 6 pole motors
• High Timing – For high speed motors (6 poles or
more) and outrunner motors.
-
Selectable cut offs – hard cut off or
soft cut off
|
User Instructions
|
|
128
Bit Secure Shopping
