Easy Glider PRO
The EasyGlider PRO is based on the popular and proven EasyGlider
and EasyGlider electric. The EasyGlider PRO is designed for brushless
outrunner motors and LiPo batteries.
However, the model can also be built as a pure glider: the kit includes
a fuselage nose-cone in which the Multiplex aero-tow mechanism #72
3470 can be installed.
The model’s flying characteristics are just right for the
beginner, the more advanced pilot will also appreciate it's great
flying characteristics. If you are an expert you will soon discover
that the EasyGlider PRO behaves like a much bigger model, and its
performance is also far better than you might expect.
- Low sink rate
- Can be ballasted to expand the airspeed range
- Landing aid - both ailerons raised
- Can be finished using any standard spray-can paints after prior
treatment with MULTIprimer # 60 2700
- Pre-fabricated moulded ELAPOR® parts
- Convenient method of aileron servo connection when the wings
are fitted
Kit Contents:
Moulded ELAPOR® parts, GRP spar, all plastic parts required
to assemble the model, small items, linkage components, decal sheet,
Specifications
| Wingspan |
1800 mm (70.86") |
| Wing Area |
41.6 dm² |
| Length |
1130mm (44.49") |
| Radio |
Rudder, elevator, aileron (2 servos), Landing aid (both ailerons
raised) |
| Flying Weight |
Approx 900g - 980g (1.98lbs - 2.16lbs) |
 |
Why not customise your model with some paints specially formulated
for the Multiplex Elapor foam. It also works great on other
foams like EPP, EPP, EPS and EPO Foams.
They can also be used on ABS Plastic, GRP as well as metal
and wood surfaces.
Please click Here for More Info |
Click
here to download the assembly instructions
Our Recommended brushless setup for this model is equivalent to
the "tuning" setup from Multiplex.
Please Note: Due to size and weight
limitations we are unable to ship kits outside of the UK
|
128
Bit Secure Shopping