Easy Glider PRO
The EasyGlider PRO is based on the popular and proven EasyGlider
and EasyGlider electric. The EasyGlider PRO is designed for brushless
outrunner motors and LiPo batteries.
However, the model can also be built as a pure glider: the kit includes
a fuselage nose-cone in which the Multiplex aero-tow mechanism #72
3470 can be installed.
The model’s flying characteristics are just right for the
beginner, the more advanced pilot will also appreciate it's great
flying characteristics. If you are an expert you will soon discover
that the EasyGlider PRO behaves like a much bigger model, and its
performance is also far better than you might expect.
Set contents:
ARTF model with the following components installed:
- Motor: PERMAX BL-O 2816-0850F
- Speed controller: BL-20 S-BEC
- Spinner, propeller driver, folding 9 x 6” propeller
- Two Nano-S servos
- Two Tiny-S servos
- Cable set installed in wings and fuselage
Also supplied:
- Multi-colour decal sheet
- Multi-lingual illustrated instructions
Remaining work:
Attach prepared tailplane and fin to the fuselage, connect prepared
pushrods (horns and swivel pushrod connectors already fitted),
apply decals. Install receiver and flight battery (not included).
Features:
- Versatile: superb gliding characteristics, capable of simple
aerobatics (loops, rolls, inverted, stall-turns …)
- The model’s low cruise speed makes it easy to circle
up in thermals Powerful, efficient brushless motor, factory-fitted
with an S-BEC speed controller, for brisk climbs and extended
flight times.
- Option to add up to 350 g ballast for better penetration and
higher cruise speed (e.g. at the slope or in windy conditions)
- ELAPOR® construction for a very robust airframe
- High level of pre-fabrication: install tailplane and fin, apply
decals, fit receiver - and go fly!
- Folding propeller with elegant plastic spinner
- Both ailerons can be raised to act as landing aid
- Two-part detachable wings for ease of transport
- Simple method of connecting the aileron servos when rigging
the model
- Plenty of space in the forward fuselage allows the use of different
sizes of flight battery
Specifications
| Wingspan |
1800 mm (70.86") |
| Wing Area |
41.6 dm² |
| Length |
1130mm (44.49") |
| Radio |
Rudder, elevator, aileron (2 servos), Landing aid (both ailerons
raised) |
| Flying Weight |
Approx 900g - 980g (1.98lbs - 2.16lbs) |
 |
Why not customise your model with some paints specially formulated
for the Multiplex Elapor foam. It also works great on other
foams like EPP, EPP, EPS and EPO Foams.
They can also be used on ABS Plastic, GRP as well as metal
and wood surfaces.
Please click Here for More Info |
Click
here to download the assembly instructions
Our Recommended brushless setup for this model is equivalent to
the "tuning" setup from Multiplex.
Please Note: Due to size and weight
limitations we are unable to ship kits outside of the UK
|
128
Bit Secure Shopping