90mm 12 Blade FMS EDF Fan suitable for 8S LiPo
Setups
FMS 90MM Pro Metal EDF is made of die-casting CNC, and the stainless steel bushing injected in the fan blade effectively increases the strength and wear resistance of the blade.
The built-in fan of the motor helps cool the motor.
The total weight of the EDF is 560g (135g without
motor).
The 12 Blade design gives great efficiency and
a wonderful"jet like" sound which rivals and Metal EDF
currently available.
Designed by professional aerodynamicist and tested
in the prestigious Baihang University.
Supplied with 1500kv inrunner motor.
Motor Features:
- 4 poles 12 slots high torque motor design
- 8mm motor shaft
- CNC cut steel billet, 6061-T6 aluminium heat sink
- Ultra low resistance windings, maximum efficiency
- High temperature
(up to 200°C
- High-speed ABEC5 ultra-durable Japanese (NMB) imported sealed,
low friction, low noise and high accuracy bearings
- Dynamically balanced rotor, extremely low
vibration
- 0.2 ultra-thin silicon steel sheet imported from Japan: excellent
performance, high magnetic permeability, high silicon content,
good insulation and heat resistance
- Built-in centrifugal fan to cool the motor
and improves the efficiency of the motor
Performance
|
8S Version |
Motor (brushless inrunner) |
4075-1500kv |
Volts under Load |
29.6V |
Current |
106A |
Watts |
3,138W |
Static Thrust (Approx.) |
4,800g |
Weight (Assembled unit inc. motor) |
560g |
Fan Swept Area |
4780mm² |
Note:
Do not run on 9S or above
There may be some scratches on the inner wall surface of the duct.
This happens in the factory testing and balancing process. The
scratches have no affect on performance.
We will not accept units
back because of this scratching
|