brushless motors LiPo batteries electronic speed controllers inrunner Motors outrunner motors HiTEC Futaba Transmitters and Receivers servos

4-Max
The Fixed Wing
Electric Flight Specialists

Est. 2007

<<<  Back
Tel: 01256 782 512
Click here to Check us out on Facebook and to get access to special offers and notifications of new releases

ST Models Turbo Beaver EP ARTF
1510mm (59.45")(A-STM190)


ST Models Turbo Beaver EP

ST Models Turbo Beaver EP

Comes with fixed landing gear AND Float set

ST Models Turbo Beaver EP

ST Models Turbo Beaver EP

Fitted with lights

Share on your Facebook Page

The ST-Model Turbo Beaver is a 'go anywhere' sport-scale model with both wheels and floats included in the box for land or water use.

With impressive manoeuvrability and a 1:1 power to weight ratio the Turbo beaver is well suited to smaller flying locations and can pull itself off the water with ease in float form.
This kit comes with large 'bush' style wheels and landing legs for land based use but there is also a foam float set in the box for water use. The moulded EPO foam floats are stepped for an easy take-off and there are steerable water rudders on the back of each one (linked to the rudder servo) for easy water based taxing. If you have never flown from water then this is perfect opportunity to bring a new element into your hobby.
The airframe itself is made from moulded EPO foam with carbon and plastic re-enforcement throughout for the ultimate balance of durability and low weight.

The motor, ESC, servos are pre-installed ready for a Tx/Rx and battery of your choice.
There are also bright LED lights pre-installed in the wing tips, a wing mounted landing light and a centre fuselage light, perfect for those calm dusk evenings.

The model is supplied pre-painted and decaled with lots of moulded plastic scale parts such as aerials, exhausts The large wings produce a light wing loading and with the wing-fences and fowler flaps you can really slow it down during touch and go's or slow passes.

The control response is crisp and positive inspiring confidence at a wide range of flying speeds. Assembly should only take a couple of hours and like all ST Model aircraft, no glue is required!

  • Float set and large 'bush style' wheels included in the box!
  • Wing fences and fowler flaps for slow speed flight
  • Tough moulded EPO airframe
  • Scale 3-Blade propeller
  • Step-by-step printed instructions
  • Bright pre-installed LED tip, landing & centre lights
  • No glue required to build!

Included in the Box

  • ST Beaver Airframe
  • Float Set
  • Wheel set
  • Printed Instructions

Required to Complete

  • Various hand tools
  • 5+ Channel 2.4GHz Radio set
  • 3S, 11.1V, 1800-2200mAh 40C LiPo
  • LiPo charger

Specifications

Wingspan 1510mm (59.45")
Length 1030mm (40.55")
Flying Weight 1275g (2.81lbs) - Wheels
1415g (3.12lbs) - Floats

Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK

 

Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK

Part Number Description Price Qty
ST Models Turbo Beaver EP ARTF ST Models Turbo Beaver EP ARTF (A-STM190) £179.99 No Longer Available
Battery PPL-60C3S-2200 £23.50

<<<  Back Top