 |
4-Max |
|||
| <<<
Back |
|
Tel: 01256 782 512 |
Email
us |
|
128
Bit Secure ShoppingPhase 3 Squall HP EP EDF ARTF
|
||||||
Designed, constructed and styled with one aim in mind.....Performance!Identical airframe to the standard version but with a new fan and motor to explore 4 cell performance. The sleek, precise, EPS foam mouldings and high quality hardware are exactly as you would expect from Phase 3 and assembly is both quick and enjoyable. Actually, a couple of hours would have it done. The sleek, delta wing design and careful use of the fuselage allows the Squall to explore its entire speed envelope with control and stability. Even the surface finish has been optimised to enhance performance by keeping it as smooth as possible and small fairings are provided for each servo. The powerful elevons can roll the Squall at an amazing rate (aka a blurr!) and the ability to loop in its own length has to be seen to be believed. The added dimension of a rudder on the Squall opens up the possibility of some radical manoeuvres in yaw too. With that 4 cell power, vertical is almost unlimited and speed is mind blowing. You will need to be quick witted with this one! The completely new fan unit, with 3 blade, 64mm impeller, 3400kv outrunner motor and 45A ESC deliver thrust at an amazing rate and power the Squall through some of the widest loops and wingovers you can imagine. It really is that good! It is recommended that you use a 2600mAh 30C battery as a minimum, so that battery life is maintained when you're having that much fun. You might need more than one pack though, as the Squall is addictive! Fan unit, 3400kv motor and 45A ESC is included in the kit. The Phase 3 Squall HP EP EDF ARTF requires the following to complete (not included)
Video courtesy of Ripmax Please Note Specifications
Please Note: Due to size and weight limitations we are unable to ship kits outside of the UK |
||||||
|
|
