


PKZ5480 Radian Pro PNP
Designed with experienced sailplane pilots in mind, the Radian™ Pro
comes out of the box with ailerons and functioning flaps that allow
pilots to take advantage of sailplane mixing functions like reflex,
camber and crow. It’s not however essential to have a programmable
system to fly it. Any 5-channel sport radio can provide basic four-channel
control with flaps using the included Y-harness. Like the original
Radian, the Radian Pro also comes equipped with a powerful 480-size
960Kv brushless motor system that can catapult it to altitude in
seconds.
Its airframe is constructed from the same tough Z-Foam™ material
and has been reinforced with fibreglass blades in the fuselage
and wing to reduce flex. This reinforcement, along with that of
the carbon fibre rod in the wing, make it possible to achieve a
level of soaring precision with the Radian Pro that’s on
par with many competition gliders.
The plug-N-play versions comes as plane
only. Everything is installed and connected ready to go in the
plane, all that’s needed is to fit and connect up a receiver
(we recommend a Spektrum AR600)
, and a 3S 1300mAh LiPo
PNP Features
-
Ready to fly in minutes
-
5-channel control – throttle, aileron,
elevator, rudder and flaps
-
Powerful 480-size 960Kv brushless outrunner motor
installed
-
E-flite™ Pro 30A brushless ESC installed
-
Durable, lightweight and repairable Z-Foam™ construction
-
Specification |
Wingspan |
2000mm (78.5") |
Length |
1140mm (45") |
Weight |
980g (34.6oz) |
Motor |
480 BL 960 KV Outrunner (installed) |
ESC |
E-Flite PRO 30A ESC (installed) |
Servos |
PKZ SV 80 sport servos (6 installed) |
Receiver |
Not supplied Min 5 channel Spektrum
DX6i transmitter and radio |
Battery |
Not supplied 3S 1300mAh LiPo |
Please
Note: Due to size and weight limitations we are unable to
ship
kits
outside
of
the
UK
|